Masculine Winter Birthday Card

This is a great birthday card for a guy during the winter season. The Toile Tidings Designer Series Paper is perfect for this card.

I love the deer in the Nature’s Beauty Stamp Set. Stampin’ Up! is donating $3 to Mental Health Organizations. What a great cause!

Tips & Instructions

• Garden Green Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Toile Tidings Designer Series Paper - 5 3/8 x 4 1/8 and adhere to card base

• Cut Garden Green Cardstock using largest and smallest scalloped Layering Oval Dies

• Cut Very Vanilla Cardstock using the 2nd largest and smallest Layering Oval Dies

• Stamp Deer on larger oval and sentiment (from Itty Bitty Birthdays) on smaller oval with Early Espresso Ink and stamp some grass with Garden Green Ink

• Adhere ovals to scalloped Ovals and adhere to card using Dimensions, be sure you don’t put a dimensional on the sentiment oval where it rests on the larger oval

• Add two Enamel Glitter Dots to sentiment label

On the inside, stamp sentiment with Garden Green Ink and rabbit image with Early Espresso Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Pretty Plaid Gift Card Holders

Today’s video is a rewind of a project I did a few years ago. I changed it up a little bit. The Wrapped In Plaid Designer Series Paper is great for this gift card holder for anyone.

Watch the video and then come back here to get all the measurements to make your own. I love how the gold glimmer tree picks up the gold accents from the plaid paper.

Tips & Instructions

• Cherry Cobbler or Shaded Spruce - 6 x 5 1/4

• On the 5 1/4 side score 3/4 on both sides - turn and on the 6” side score 1 1/4 and 3 3/4 using the Simply Score Tool

• Cut off each of the rectangles on the four corners and then cut small diagonal to make tabs and round corners of base

• Wrapped In Plaid Designer Series Paper 3 1/2 x 5 3/4, round all 4 corners

• Belly Band - 1 x 6 either Cherry Cobbler or Shaded Spruce

• Punch tree from Gold Glimmer Paper using the Pine Tree Punch

• Sentiment layer - 1 x 3 1/2, round to two corners, stamp sentiment in Cherry Cobbler or Shaded Spruce (Itty Bitty Christmas Stamp Set)

• Punch top of the tree and adhere to sentiment layer

• Follow steps in video using strong adhesive (Tear & Tape or Multipurpose Liquid Glue)

Below is the Cherry Cobbler base and belly band.

Below is the Shaded Spruce base and belly band.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Seasons Greetings Old Fashioned Christmas

The Toile Tidings Designer Series Paper reminds me of an old fashioned Christmas. I cut out a small scene with the Cup of Cheer Dies.

Tips & Instructions

• Garden Green Card Base - 5 1/2 x 8 1/2, score at 4 1/4 (top folding horizontal)

• Toile Tidings Designer Series Paper - cut with largest Stitched Rectangle Die

• Garden Green - cut 3rd largest Stitched Rectangle Die

• Cut 2 cups from the Toile Tidings Designer Series Paper making sure you have a scene in each

• Stamp sentiment (from Itty Bitty Sentiments) with Garden Green Ink on scrap of Very Vanilla and punch with Classic Label Punch

• Adhere layers to card base and adhere cups an sentiment label with Dimensionals

• Cut bow from scrap of Very Vanilla and adhere as shown, add Glitter Enamel Dot to center

On the inside stamp the sentiment (from Itty Bitty Christmas) with Garden Green Ink. Adhere a 3/4 x 5 1/4 strip of Toile Tidings Designer Series Paper to the bottom.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Sketch Saturday - Feels Like Frost

It’s Saturday, time for another sketch. I am playing along with a challenge from the Splitcoaststampers CAS(E) This Sketch. I used a piece of Feels Like Frost Designer Series paper and just a few layers and a sentiment….easy, peasy.

Here’s the link to the sketch if you want to see what other crafters have created. CAS(E) this Sketch #350

Tips & Instructions

• Night Of Navy - 5 1/2 x 8 1/2, score at 4 1/4

• Seaside Spray Layer - 5 3/8 x 4 1/8

• Silver Foil Layer - 5 1/4 x 4

• Feels Like Frost Designer Series Paper - 5 18 x 3 7/8

• Whisper White Strip 1/2, punch one end with Banner Triple Punch and cut to about 2 1/2

• Stamp sentiment (from Itty Bitty Christmas) using Versamark Ink and heat emboss with Silver Embossing Powder

• Night Of Navy Strip 5/8, punch one end with Banner Triple Punch and cut so even border is around when adhering white strip to it

• Adhere all layers

• Adhere sentiment strip using dimensionals

• Add Rhinestone

On the inside, stamp sentiment with Night Of Navy Ink

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Cute Little Christmas Parcels

The Perfect Parcels Dies are great for creating little boxes for any occasion. I made these for Christmas treats.

In the video below I’ll show you how to put these parcels together and make the belly band to go around it.

Tips & Instructions

• Cut 2 of the box pieces using the Perfect Parcel Dies (Garden Green or Real Red)

• Fold all score lines and make box according to video. Make sure you use strong adhesive (Multi-Purpose Liquid Glue or Tear & Tape)

• Belly Band - 3 1/4 x 8, score at 1 1/4, 2 5/8, 4 7/8, 6 2/8 (I used Toile Tidings Christmas Designer Series Paper for the green and Let It Snow Designer Series Paper for the red)

• Wrap Belly Band around box and adhere edges to make the band. Be sure it can slide easily

To decorate the Red/Let It Snow box:

• Fussy cut snowman

• 9/16 Whisper White Strip

• 3/4 Real Red Strip

• Stamp sentiment (from Itty Bitty Christmas) with Real Red on white strip

• Using Banner Triple Punch, punch banner end to both white and red strip and adhere together

• Cut strip to size to fit behind snowman and adhere to box

• Adhere snowman with Dimensionals

To decorate the Green/Toile Christmas box:

• Cut Garden Green background piece for sentiment label

• Cut Gold Foil detailed piece and adhere over the green background layer

• Stamp sentiment (from Itty Bitty Christmas) on Very Vanilla with Versamark and heat emboss with Gold Embossing Powder and adhere over the label base

• Adhere label to box using Dimensionals

• Add some Gold Glitter Dots

I’ve listed the products to make both boxes. If you want any of the products I used, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Toile Christmas Wishes Card

The floral images in the Toile Christmas Bundle are so pretty. I colored the leaves and berries on the stamp with Stampin’ Write Markers and then stamped and cut with the coordinating dies.

Tips & Instructions

• Garden Green Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Whisper White - cut with largest Stitched Rectangle Die, adhere to card base

• Real Red - cut with 2nd largest Stitched Rectangle Die, adhere to card

• Floral Image Stamp - color leaves with Garden Green Stampin’ Write Marker and berries with Real Red Stampin’ Write Marker (NOTE - do NOT color stamp with Stampin’ Blends as they are alcohol markers). Breath on the stamp to moisten and then stamp on scrap of Whisper White. Repeat and cut both with coordinating die

• Stamp sentiment with Real Red Ink and cut with coordinating die

• Cut 3 leaves with leaf die from Garden Green Cardstock

• Adhere floral images and leaves as shown on card

• Adhere sentiment banner using Dimensionals

• Make bow with 3 strands of Linen Thread and adhere with Mini Glue Dot

On the inside stamp floral image (color stamp with Garden Green and Real Red and stamp). Stamp sentiment with Real Red Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Make a Beautiful Christmas Wreath with the Stamparatus!

The Stamparatus is the perfect tool to take a floral sprig and turn it into a beautiful Christmas wreath!

I used the Tidings All Around Stamp Set for the wreath and the So Many Stars Stamp Set for the “JOY” sentiment and I love how they turned out. In the video below, I’ll show you how to use the Stamparatus to make a wreath, so easy to do!

Tips & Instructions

• Shaded Spruce Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Whisper White Layer - 4 x 4

• Using the Stamparatus, stamp floral sprig from Tidings All Around with Shaded Spruce Ink. Follow the template and steps on the video

• Stamp the sentiment from So Many Starts in Real Red Ink

• Adhere wreath layer to card base

• Make Bow and adhere to bottom of the wreath with Mini Glue Dot

• Add Red Rhinestones in groups of 3 around the wreath

I used the Real Red Ruched Ribbon on this card which I really love but it is a little bulky for the mail.

The ribbon on this card is the Silver Metallic-Edge Ribbon.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Simple Christmas Wreath - Tidings All Around

The wreaths you can make with the Tidings All Around Bundle are so simple but so pretty. The Old Olive/Pretty Peacock Reversible Ribbon is just beautiful.

Tips & Instructions

• Pretty Peacock Card Base - 4 1/4 x 11, score at 5 1/2 (top folding)

• Crumb Cake Layer - 5 1/2 x 3 3/4

• Stamp wreath on Very Vanilla scrap using Old Olive Ink

• Place wreath over Crumb Cake Layer to determine placement of sentiment and stamp sentiment with Pretty Peacock Ink

• Adhere layers and wreath

• Make bow with Old Olive/Pretty Peacock Reversible Ribbon and adhere with Mini Glue Dot

On the inside, stamp sentiment (from Itty Bitty Christmas) with Pretty Peacock Ink and floral image with Old Olive Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Free Shipping the Month of December!!!

Shipping is on me this month. Just order from my Online Store, email me with your order # and shipping charges and I reimburse you for shipping via PayPal, Venmo or Check.

Sketch Saturday - Tidings All Around

I found today’s sketch on Pinterest by searching Card Sketches. It’s a simple card but I think the Night Before Christmas Designer Series Paper makes it beautiful.

Here’s the sketch. It’s from Viva La Verve. They post lots of sketches on Pinterest.

Tips & Instructions

• Real Red Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Night Before Christmas Designer Series Paper - 5 3/8 x 4 1/8 and adhere to card base

• Stamp sentiment from Tidings All Around with Real Red Ink on scrap of Whisper White and punch with Story Label Punch

• Cut 3 strips of Real Red at 1/2 and punch end with Banner Triple Punch

• Lay out the strips on card to get placement and then trim so they varying lengths (mine are 2 7/8, 2 3/8, 2 — I just eyeballed it)

• Adhere banner strips to card and then adhere sentiment label using Dimensionals

• Add some Red Rhinestones and Pearls

On the Inside, I stamped the floral image with Mossy Meadow Ink and the sentiment with Real Red Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Fun Pop-Up Gift Card Holders

These Gift Card Holders are just perfect for Christmas or any occasion. I saw these on various YouTube Videos and had to try it. I’m not sure who the original designer is, but Thank You, I love them.

I’ll show you how to make the Navy card with the beautiful silver embossing on the video and scroll down for the instructions and products for the plaid one.

Tips & Instructions

• Night Of Navy card base - 4 1/4 x 11, score 4 1/2, 5 1/2 and 6 1/2

• Whisper White Strip - 1 x 11 for belly band

• Scraps for outside star and inside star

• Fold card base on score lines and adhere as shown on video and punch corners with the Detailed Trio Punch

• Cut along mountain top fold so the card can fit in

• Stamp stars using Versamark on the outside and top flap of the inside

• Cut Star and stamp JOY sentiment with Versamark and emboss in Silver and adhere to inside

• Wrap belly band around and determine placement for sentiment

• Stamp sentiment Love and Peace on belly band with Versamark and emboss with Silver

• Adhere ends of belly band to secure it and make sure it can slide easily

• Stamp star with Versamark and emboss with Silver, cut out with coordinating star die and adhere to belly band, add a Rhinestone to center of the star

This is what the inside looks like with the card popped up.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 
Scroll down for the instructions and products for the plaid version.



The Plaid gift card holder’s base is made with Shaded Spruce. The Wrapped In Plaid Specialty Designer Series Paper was cut at 4x4 but I think I would make them 4 1/4 x 4 to make it fit better. Cut 4 of those for both panels on the outside and inside.

The belly band Cherry Cobbler and cut at 1 x 11. Stamp the sentiment with Versamark and heat emboss with White Embossing Powder. Punch the tree with Gold Foil Paper. I also punched the place for the gift card with the Story Label Punch and then cut ends to fit the card.

Cut sentiment label with the square from the Frosted Frames Dies (or just cut a square to fit) Stamp sentiment with Cherry Cobbler Ink and tree with Shaded Spruce Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. 

Flap Over Fun Fold Christmas Card

Here’s a Fun Fold Card that was inspired by Dawn Griffith. I watched her video and changed it up a little bit.

Don’t you just love this snowman. He makes me smile. It’s from the Snowman Season Stamp Set and I used the Let It Snow Designer Series Paper to coordinate with it. Watch the video to see all the steps to make this Fun Fold card.

Tips & Instructions

• Real Red Card Base - 5 1/2 x 4 1/4

• Coastal Cabana Layer - 5 1/2 x 4

• Whisper White Layer 5 1/2 x 3 1/4

• Let It Snow Specialty Designer Series Paper - 6 x 3 1/2, score at 5 9/16

• Scrap of Real Red - Cut scalloped ring using scalloped Layering Circle Die and plain Layering Circle Die that nest together

• Scrap of Coastal Cabana - Cut ring using Layering Circle Dies that nest together (use the one plain one from the scalloped ring and the next smallest)

• Using the smaller plain circle die from the Coastal Cabana ring, cut circle out of the Designer Series Paper where you want the snowman to peek out

• Line up the Whisper White Layer behind the Designer Series Layer and mark circle cut out with a pencil for placement of snowman and stamp snowman with Black Memento Ink, then stamp sentiment with Real Red Ink

• Add small dots of Liquid Glue on snowman image - on snowflakes and ground and then pour Glitter over

• Adhere Coastal Cabana ring around circle and then adhere Real Red scalloped ring

• Line up layers and adhere folded Designer Series Paper to back of Coastal Cabana Layer

• Adhere Whisper White layer to Coastal Cabana Layer making sure snowman is centered in circle

• Adhere to Real Red card base

• Make bow and adhere with Mini Glue Dots

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Elegant Christmas Card - Sending you a little Yuletide Cheer

I love all the copper on this card: the sentiment, the floral background and the Brightly Gleaming Specialty Designer Series Paper! Gorgeous!!!

Tips & Instructions

• Pretty Peacock Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Brightly Gleaming Specialty Designer Series Paper - 5 1/2 x 2 1/2, adhere to card base

• Gold Foil - cut with Frosted Frames Dies

• Whisper White Cardstock - cut with Frosted Frames Dies

• Stamp sentiment with Versamark and heat emboss Copper Embossing Powder and adhere to Gold Foil floral frame

• Adhere frame to card using Dimensionals

On inside, heat emboss sentiment with Copper Embossing Powder. Adhere 3/4 x 5 1/4 strip of Designer Series Paper to bottom.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Sketch Saturday - Snow Front

Today’s sketch is another CAS(E) This Sketch challenge from Splitcoaststampers and I really like it.

Here’s the sketch. You can play along at this link CAS(E) this Sketch #349

Tips & Instructions

• Coastal Cabana Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Let It Snow Designer Series Paper Layer - 4 x 3

• Real Red Cardstock Layer - 4 x 2 1/4

• Adhere layers to card base and then adhere red/white striped strip from Let It Snow Designer Series Paper across seam

• Whisper White Stitched Rectangle (5th largest)

• Velum Layer - 3 7/16 x 2 1/8 (cut so it fits inside the stitching for the rectangle

• Stamp tree with Early Espresso, birds with Real Red, snow with Smoky Slate and sentiment (from Itty Bitty Christmas) with Real Red. (Note, leave to dry or dry with heat tool. I like to just let it sit so it doesn’t warp at all.)

• Adhere Vellum layer to Stitched Rectangle and adhere to card with Dimensionals

On the inside stamp tree with Early Espresso Ink and sentiment and bird with Real Red Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Embossed Christmas Pizza Boxes

Transform a plain gold pizza box into a gorgeous treat box!

Watch the video below to see how to emboss the pizza box and then make a pretty belly band to wrap around it.

Tips & Instructions

• Emboss Gold Mini Pizza Box using the Tin Tile 3D Embossing Folder (use Embossing Plate with 3D Embossing Folders) and make the box

• Cut belly band with either 2 x 8 1/2 piece of Shaded Spruce or Cherry Cobble Cardstock

• Cut oval with Whisper White Cardstock and scalloped oval with Wrapped In Plaid Designer Series Paper and adhere them together

• Stamp sentiment from Itty Bitty Christmas with either Cherry Cobbler or Shaded Spruce Ink

• Punch 2 trees from Shaded Spruce Cardstock and 1 tree from Wrapped In Plaid Designer Series Paper and adhere to oval, using Dimensionals to pop up the plaid tree

• Wrap belly band around pizza box leaving the opening at the top and adhere oval to top

• Tie Jingle Bell with Linen Thread and adhere to tree with Mini Glue Dot

This box has the Cherry Cobbler belly band.

I used Shaded Spruce for the Belly Band on this box.

This is one of my go to stamp sets for Christmas. It has such great sentiments.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Cup Of Christmas - Cup Of Cheer!

Here’s another card I made using the Cup Of Christmas Bundle. I love how you can change the colors and get a different look. Look at yesterday’s Blog post for a video using different papers/colors.

This Bundle has some great images and dies. If you purchase a bundle, you save 10%.

Tips & Instructions

• Merry Merlot Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Rococo Rose Layer - 5 1/4 x 4

• Whisper White Layer - 5 x 3 3/4, emboss with Subtle Embossing Folder and adhere layers to card base.

• Cut cups with Rococo Rose and Merry Merlot Cardstock

• Cut poinsettia with Whisper White Cardstock and adhere to one of the cups

• Heat emboss sentiment on one cup with white embossing powder

• Cut candy canes from Rococo Rose and Merry Merlot Cardstock. Adhere striped over solid candy cane. Make sure you flip one of them so it faces the opposite way.

• Adhere candy canes behind cup and adhere cups using Dimensionals

• Add 3 Faceted dots

On the inside, stamp sentiment with Merry Merlot Ink and floral image with Rococo Rose Ink.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

Sweet Christmas Wishes with Cup Of Christmas!

The Cup Of Christmas Bundle is really fun and you can make some cute cards with it. The stamp for the cup is unique; you can stamp either side so you can get the handle to be on the left or the right….how cool!

Watch the video to see how to use the Snowfall Accents Puff Paint to create the foam on the rim of the cup. It is amazing!

Tips & Instructions

• Real Red Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Coastal Cabana Layer - cut with 2nd largest Stitched Rectangle

• Whisper White Layer - cut with 3rd largest Stitched Rectangle

• Scraps of Let It Snow and Real Red for cup, candy canes and bow

• Stamp sentiment on white layer using Real Red Ink

• Add line of Snowfall Accents Puff Paint to rim of cup and heat with Heat Tool until it puffs up

• Adhere layers to card base and candy canes (criss crossing them)

• Adhere bow to cup and then adhere cup over candy canes using Dimensionals

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order.

3 Day Sale!!!

Are you ready for a sale??? Stampin’ Up! is having its Online Extravaganza Sale November 20-22, 2019.

Get ready for three days of savings with the Stampin’ Up! Online Extravaganza! For three days only, you can get these deals:

15% OFF INKPADS AND CARDSTOCK IN: 
Neutrals Collection
Regals Collection
2018–2020 In Colors
2019–2021 In Colors (except Purple Posy) 

TAKE ADDITIONAL 5% OFF THE ORIGINAL 10% DISCOUNT: 
8 bundles
Neutrals Classic Stampin’ Pads Assortment
Regals Classic Stampin’ Pads Assortment
2018–2020 In Colors Classic Stampin’ Pads Assortment

Joy To The World!

The Feels Like Frost Specialty Designer Series Paper is so beautiful. I cut a piece for the focal point of this card using the Frosted Frames Dies.

One side of the paper has beautiful winter images and the other is silver foil and white. So gorgeous!!!

Tips & Instructions

• Night of Navy Card Base - 4 1/4 x 11, score at 5 1/2 (side folding, horizontal card)

• Seaside Spray Layer - 4 x 5 1/4

• Wrap piece of Seaside Spray Metallic Ribbon around Seaside Spray layer adhering in the back and attach layer to card base

• Cut Feels Like Frost Specialty Designer Series Paper using the Frosted Frames Dies. Prior to cutting move the die around so you can choose the area you want to show. Cut some extra foliage from paper.

• Using Embossing Buddy, wipe focal. Stamp sentiment (from Itty Bitty Christmas) using Versamark and then heat emboss with White Embossing Powder

• Adhere the extra foliage behind focal piece and then adhere focal piece using Dimensionals

• Adhere Rhinestones randomly

On the inside, stamp sentiment with Night Of Navy Ink. Cut snowflakes from the leftover Feels Like Frost Specialty Designer Series Paper and adhere on the inside.

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order. 

O, Holy Night, The Stars Are Brightly Shining!

So Many Stars is the perfect name for this bundle. There are tons of stars in the stamp set and the dies!

Here’s the card I made using this bundle. I used Night Of Navy, Seaside Spray and Gold Foil on this card and I think it turned out beautiful.

I’ll walk you through the steps to make this card on the video below.

Tips & Instructions

• Night Of Navy Card Base - 5 1/2 x 8 1/2, score at 4 1/4

• Seaside Spray Layer - 5 1/4 x 4

• Stamp sentiment on bottom corner of card with Versamark and emboss with Silver Embossing Powder

• Stamp star image with Versamark on Whisper White Scrap and emboss with Silver Embossing Powder

• Cut star and swoosh of stars with Silver Foil Sheet using Stitched Star Dies

• Adhere swoosh to Seaside Spray Layer

• Adhere embossed star to silver star and then adhere over swoosh using Dimensionals

• Adhere smaller stars around

• Adhere layer to card base

If you want any of the products I used on this project, just click on the item below or the Shop Now button and it will bring you to my Online Store. Please use the current Host Code when you go to checkout your order. You can also click directly on an item to order.